yes u guys are right, allen bit, sorry mike
mike t
>From: John_Neff@Dell.com
>Reply-To: dakota-truck@dakota-truck.net
>To: dakota-truck@dakota-truck.net
>Subject: RE: DML: replacing brake rotors
>Date: Fri, 26 Apr 2002 14:39:19 -0500
>
>
>1) Jack up front end and remove the wheels.
>2) Remove caliper with allen wrench and remove old pads by pulling them
>out.
>3) Remove retaining clips from wheel lugs - pliers work great!
>4) Pull rotor off
>5) Put new rotor on, place new pads in caliper, bolt caliper on, bolt wheel
>on, lower vehicle.
>
>I did both sides on my truck in less than 1 hour.
>
>John
>http://jndneff.home.texas.net/dakota/dakota.html
><http://jndneff.home.texas.net/dakota/dakota.html>
>
>
> >My parent's 4X4 durango needs to have new rotors. I
>
> >was wondering what's involved in doing a job like
>
> >this. Is it pretty much a DIY job?
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:26 EDT