You need to get MSN 7.
-Ryan
99 DA RC R/T
MSN Support Tech.... I was just joking, don't do it! :)
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of
MrDakota95@aol.com
Sent: Tuesday, May 07, 2002 9:12 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Re: Transgo Shift Kits?
In a message dated 5/5/02 12:09:09 PM Central Daylight Time,
mike@mypants.org
writes:
<<
I like mine, very short firm shifts (well, when its not slipping) I also
didn't do any of the servos, Didn't do the rear one because of the
"professional only" difficulty and tried to swap springs on the front one
but the springs were different, so no go.
How many turns did you go on the converter pressure adjustment?
mm
>>
Sorry this reply took so long having trouble with AOL 7.0,
I set it by the instructions with the kit which was flush with the brace for
a non modified engine, now I'm thinking of giving it a few turns up to 5
turns max.
What have you got yours set at?
Shawn (aka)
MrDakota95
95 CC 5.2 4x2 Auto
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:31 EDT