Don't know if IAT (or IAC) would affect acceleration. Would certainly
affect idle though.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of TonyC
Sent: Saturday, May 11, 2002 1:13 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: Stumble on Acceleration
Have you checked your IAT?
TonyC
-----Original Message-----
From: Robert Parrish <parrishfarm@worldnet.att.net>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Saturday, May 11, 2002 4:05 PM
Subject: DML: Stumble on Acceleration
>
>Can anybody help me figure out why my truck stumbles while accelerating? I
>notice it mainly after a cold start, but it's intermitant. I just replaced
>the fuel pump, plugs (correctly gapped) cap and rotor, and swapped out TPS
>with an older slightly used one. No change. The truck continues to run
>strong. No noticable loss of power, but the problem still exist. I've
>checked for vacume leaks and also tried moving MAP vacume to the intake
>manifold port. No help. I'm using the old F&B stage 2 T.B. Could there
>possibly be a problem with the throttle shaft, cam sensor or crank sensor?
>The pcm list no codes! Help!
>
>Robert Parrish
>Richmond Va.
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:33 EDT