> My question is: Is it possible to tell without removing it if it's the
> wrong water pump for this application?
Not knowing casting #s, etc, disconnect the upper radiator hose at the
radiator and observe which direction the water is flowing. Towards the
radiator, OK. Out of the radiator, not so good, but you've found the
culprit. Don't forget, lowere the coolant level below the opening in the
radiator before starting the test, or you may get fooled.
HTH
Good luck,
Jon
STL MO
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:37 EDT