The stock fan off a Viper is 17x24 with shroud. The fan itself is 17", and
can cool off 488 cubes of V10.
Just a thought
-----Original Message-----
From: Bill Knight <wknight40@comcast.net>
To: dakota-truck-moderator@bent.twistedbits.net
<dakota-truck-moderator@bent.twistedbits.net>
Date: Monday, June 03, 2002 5:16 PM
Subject: Re: DML: RE: Electric Fan Woes
>
>With all the talk of the Black Magic 150 electric fans I started doing some
>looking. The inside poertion of my radiator measures about 22x22 inches.
>The BM150 is a 15 inch fan. Why not go with a 16 or 18 inch fan. Found on
>of each at http://www.northernautoparts.com/ProductDetail.cfm?ProductId=505
>If this link does not work just use http://www.northernautoparts.com and
>look for high performance electric fans. The 18" fan only requires 17-3/4"
>x 17-3/4" x 3-3/4"
> to mount it. And it seems cheaper to by than the BM150, at least the few
>sites I checked. Just curious, maybe someone has tried thes and found them
>unreliable and I did not catch that discussion.
>
>
>"tmfu" <tmfu@comcast.net> wrote in message
>news:LKECLELCDCKMMCOLDBOCCEOHCCAA.tmfu@comcast.net...
>>
>>
>>
>>
>> Rick,
>> Thanks for the reply. I'll be starting with the 150 fan...if I need more
>> I'll get the water pump.
>> Thanks
>> Bob
>>
>>
>> Hey Bob,
>> THis is a little bit off the subject, but how did you do at that show in
>> Rahway Park?
>>
>> Greg
>> 2k1 Dodge Neon ES
>> Rahway, NJ
>> http://kernelpanic.dyn.dhs.org
>>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:41 EDT