More than likely .......
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Bernd D. Ratsch
Sent: Saturday, June 08, 2002 7:36 AM
To: dakota-truck@dakota-truck.net
Subject: RE: DML: Dash gone nuts - no bus? Need help fast!
TSB - Check the "Tips and Tricks" page on SpeedTweaks (Instrument
Cluster Glitches)...it could just be a ground.
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Andy Levy
Sent: Friday, June 07, 2002 9:02 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Dash gone nuts - no bus? Need help fast!
OK, I've been to the FSM now. Page 8E-7 lists every code I have (and
they all make sense given the gauges), but they all have "check X" for
the correction. Code 110 says "replace the cluster" which is easy.
Should I replace the cluster and see if that fixes it, or try those
other steps first?
Andy Levy wrote:
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:43 EDT