bump stop is on the lower control arm. So, i haven't had the tires off my
dak for awhile, so I don't knwo what it is, without having a better
description. What's it connected to, etc?
william
----- Original Message -----
From: "Esler, Joel" <joel.esler@us.army.mil>
To: <dakota-truck@dakota-truck.net>
Sent: Sunday, June 09, 2002 4:52 PM
Subject: DML: RE: Re: RE: Re: Question
>
> Hm. I am not too sure what it is called, but I am pretty sure it's not a
> bumpstop.
>
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of William H.
> Hiatt III
> Sent: Sunday, June 09, 2002 7:25 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Re: RE: Re: Question
>
>
>
> It's a bump stop. AFAIK, the factory ones are riveted on there, -vs- the
> aftermarket ones are bolted in there.
>
> william
> ----- Original Message -----
> From: "Esler, Joel" <joel.esler@us.army.mil>
> To: <dakota-truck@dakota-truck.net>
> Sent: Sunday, June 09, 2002 3:58 PM
> Subject: DML: RE: Re: Question
>
>
> >
> > no, i know what that is, it's black, and if you take off the tire, it's
> > directly above the studs.
> > -----Original Message-----
> > From: owner-dakota-truck@dakota-truck.net
> > [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Hop
> > Sent: Sunday, June 09, 2002 6:31 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: DML: Re: Question
> >
> >
> >
> > Joel,
> > Could it be the bump stop? Looks like a round rubber bumper. It keeps
the
> > a-arm from bottoming out. Not sure this is what you speak of.. hth, Hop
> > ----- Original Message -----
> > From: "Esler, Joel" <joel.esler@us.army.mil>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Sunday, June 09, 2002 5:15 PM
> > Subject: DML: Question
> >
> >
> > >
> > > I know I should know, I know what it's called on a Humvee, but don't
> know
> > if
> > > the term is different on a truck, and I need some advice.
> > >
> > > Behind my right front tire, there is this rubber thing that sits on
top
> of
> > > the "A" arm. Now, it's all split and torn up and stuff, and I was
> > wondering
> > > A) the fuction, and B) I wanna know the implications and difficulty of
> > > replacing this piece
> > >
> > > (Ball joint???)
> > >
> > > J
> > >
> > >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:44 EDT