The Mopar ones work good. No difference between RT and non-RT. The Mopar
ones are attached via pins, screws, and double sided tape. They are ordered
based on the color of your truck. That cost is included. There are some
after-market ones that you have to paint.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Eric
Sent: Sunday, June 09, 2002 8:02 PM
To: Dodge
Subject: DML: fender flares
Greetings.
I'm considering adding some fender flares to my '99 Dak and need some
advise. First, is there any difference in the flares used on the "normal"
Dak, as compared to the R/T version, and IF THERE IS, which would you
recommend? Secondly, has anyone tried any aftermarket molded pieces?
Last....is there any pointers I should be aware of as far as
gasketing/seals/adhesives? Thanks a bunch.
Eric Luce
'99 Dak EC slt
2WD/ 5.2L/ Auto
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:44 EDT