On Gen IIIs with the rear axle speed sensor - If you change gears to one of
the factory available ratios, all you need to do is reset the PCM afterwards
to have the PCM recognize the gear ratio change. Assumming you are still
running a factory height tire, the speedo will be correct.
TonyC
-----Original Message-----
From: Ronald Wong <ron-wong@cox.net>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Thursday, June 13, 2002 8:16 PM
Subject: DML: RE: Re: 3.91 gears ???
>
>Huh!?
>
>Ron
>00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
>For modifications see my DML Profile (URL follows)
>http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
>-----Original Message-----
>From: owner-dakota-truck@dakota-truck.net
>[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of TonyC
>Sent: Wednesday, June 12, 2002 10:12 PM
>To: dakota-truck@dakota-truck.net
>Subject: DML: Re: 3.91 gears ???
>
>
>
>Self sensing. Just reset the PCM
>TonyC
>
>-----Original Message-----
>From: Tim Althoff <yllwdkta@insight.rr.com>
>To: Dml (E-mail) <dakota-truck@dakota-truck.net>
>Date: Wednesday, June 12, 2002 8:50 PM
>Subject: DML: 3.91 gears ???
>
>
>>
>>everything went awesome on truck this past weekend...I love them! however
>I
>>do have two questions. 1) the dumb shift light comes on when I'm in fifth
>>gear...anyone know why? 2) does it make the speedometer go faster than
>your
>>actual speed or slower?
>>
>>Tim Althoff
>>99 V6 RC 5-speed SY
>>http://www.yllwdkta.com
>>http://go.to/ohiomeet
>>
>>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:46 EDT