It doesn't matter whether it's factory or not, the PCM or actually the CABS
does NOT see it. Your problem might be, if you use a non-Dodge rear end,
figuring out how to mount the sensor on the exciter ring that doesn't fit
back there.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of TonyC
Sent: Friday, June 14, 2002 12:04 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: Re: Re: RE: Re: 3.91 gears ???
Tire size (height) will throw off the speedo. Rear axle ratio (provided its
a factory available one) won't. There are people on the list here who are
using an electronic box that lets you make adjustments for NON-stock height
tire use. Anyone have the info on that? (or check the archives)
TonyC
-----Original Message-----
From: Andy Levy <andylevy@yahoo.com>
To: dakota-truck-moderator@bent.twistedbits.net
<dakota-truck-moderator@bent.twistedbits.net>
Date: Friday, June 14, 2002 2:17 PM
Subject: DML: Re: Re: RE: Re: 3.91 gears ???
>
>Why can't you go to a non-factory size? If the change didn't require a PCM
>reprogram anyway, what's it matter the ratio?
>
>""TonyC"" <acellan1@tampabay.rr.com> wrote in message
>news:00d701c213c7$6826fb40$2b602241@a.tampabay.rr.com...
>>
>> On Gen IIIs with the rear axle speed sensor - If you change gears to one
>of
>> the factory available ratios, all you need to do is reset the PCM
>afterwards
>> to have the PCM recognize the gear ratio change. Assumming you are still
>> running a factory height tire, the speedo will be correct.
>> TonyC
>>
>> -----Original Message-----
>> From: Ronald Wong <ron-wong@cox.net>
>> To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
>> Date: Thursday, June 13, 2002 8:16 PM
>> Subject: DML: RE: Re: 3.91 gears ???
>>
>>
>> >
>> >Huh!?
>> >
>> >Ron
>> >00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
>> >For modifications see my DML Profile (URL follows)
>> >http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>> >
>> >
>> >-----Original Message-----
>> >From: owner-dakota-truck@dakota-truck.net
>> >[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of TonyC
>> >Sent: Wednesday, June 12, 2002 10:12 PM
>> >To: dakota-truck@dakota-truck.net
>> >Subject: DML: Re: 3.91 gears ???
>> >
>> >
>> >
>> >Self sensing. Just reset the PCM
>> >TonyC
>> >
>> >-----Original Message-----
>> >From: Tim Althoff <yllwdkta@insight.rr.com>
>> >To: Dml (E-mail) <dakota-truck@dakota-truck.net>
>> >Date: Wednesday, June 12, 2002 8:50 PM
>> >Subject: DML: 3.91 gears ???
>> >
>> >
>> >>
>> >>everything went awesome on truck this past weekend...I love them!
>however
>> >I
>> >>do have two questions. 1) the dumb shift light comes on when I'm in
>fifth
>> >>gear...anyone know why? 2) does it make the speedometer go faster than
>> >your
>> >>actual speed or slower?
>> >>
>> >>Tim Althoff
>> >>99 V6 RC 5-speed SY
>> >>http://www.yllwdkta.com
>> >>http://go.to/ohiomeet
>> >>
>> >>
>> >
>> >
>>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:46 EDT