RE: Need a set of (non-cracked) V6 Magnum Heads

From: greg conner (dodgeboy93@hotmail.com)
Date: Sun Jun 23 2002 - 10:45:47 EDT


Well if it comes down to It I remeber Marty at KRC telling me he could get
what he called red heads which had hardened seats put in them. This would
of solved the seat crack problem wich was found in most heads. They ran
about 200 a piece though If I rember correctly

>From: "Bernd D. Ratsch" <bernd@texas.net>
>Reply-To: dakota-truck@dakota-truck.net
>To: dakota-truck@dakota-truck.net
>Subject: RE: DML: Need a set of (non-cracked) V6 Magnum Heads
>Date: Sun, 23 Jun 2002 09:16:05 -0600
>
>
>There isn't a difference...just want to make sure the heads are of the
>same year or newer (personal preference).
>
>- Bernd
>
>-----Original Message-----
>From: owner-dakota-truck@dakota-truck.net
>[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of greg conner
>Sent: Saturday, June 22, 2002 11:34 PM
>To: dakota-truck@dakota-truck.net
>Subject: Re: DML: Need a set of (non-cracked) V6 Magnum Heads
>
>
>
>
>hehehe..Bernd....know you know how I feel. I went through a 7 of them
>to
>find a good set. I have one more uncracked one I beleive in my shed.
>All
>the other ones I had were cracked between the valve seats. If you want
>it
>let me know.
>
>By the way...what the difference in a 97 and up head???
>
>
>greg
>
>_________________________________________________________________
>Send and receive Hotmail on your mobile device: http://mobile.msn.com

_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail.
http://www.hotmail.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:49 EDT