Yeah, the 8.5s. He watched me install the Made4You looms on my set of
MSDs but opted to stick with the stock ones.
Dave wrote:
> 8.5mm? Cause I couldn't get mine to fit, maybe if I pushed them in there
> really hard, but didn't want to mess them up, they'll be fine till I can get
> some custom red looms.
>
> --
> Dave
> Bensalem, PA
> '02 R/T RC Flame Red
>
> "andy levy" <andylevy@yahoo.com> wrote in message
> news:ais4a3$vpq$2@bent.twistedbits.net...
>
>>Don't ask me how (won't see it till next week), but my brother made the
>>MSDs fit in the stock looms on my father's Durango.
>>
>>Ronald Wong wrote:
>>
>>>I use those and have had no problems. You'll have to buy a separate set
>>
> of
>
>>>guides as the stock ones that are bolted to the valve covers won't work.
>>>
>>>Ron
>>>00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
>>>For modifications see my DML Profile (URL follows)
>>>http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:12 EDT