'96 MAP connector is different than the '95 and older models. (Know
this from the '96 Dak at the shop). OBD-I and OBD-II doesn't have
anything to do with it (on a PCM level)...but it's the change-over of
the connector for the different code.
Yazaki-USA has the connectors for the O2 and IAT...wonder if they have
the MAP connectors as well.
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Wisotzkey,
Rich
Sent: Monday, August 12, 2002 12:54 PM
To: 'dakota-truck@dakota-truck.net'
Subject: RE: DML: RE: MAP Connector Part Numbers
Thanks Jon! This ought to help. I'll let you know.
Rich
-----Original Message-----
From: jon@dakota-truck.net [mailto:jon@dakota-truck.net]
Sent: Monday, August 12, 2002 12:42 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: MAP Connector Part Numbers
"Bernd D. Ratsch" <bernd@texas.net> wrote:
: Rich,
: '96 is OBD-II and the older style use a slightly different connector.
: '96-'02 are the same though.
The connector change doesn't have anything to do with OBD-II, the
changes occured in '97 with the addition of the CCD bus. As such,
'92-96 are the same, and '97+ are the same. As far as the throttle body
goes, to the best of my knowledge, only the MAP and TPS connectors
changed, the IAC connector has remained the same since '92.
Rich, I don't know if this will help or not, but the following numbers
were on my MAP connectors ('96 Dak, '92 Ram):
On back of connector on grey piece above wires: 54800 (both '92 and
'96)
On back of connector on grey piece below wires: 227 ('92)
253 ('96)
On ridge of connector: 76614 A004 ('92)
76614 A002 ('96)
I did a 'net search and looked around at amp.com but wasn't able to
come up with anything. Pretty frustrating really, *somebody*
is (or was) making a whole mess of these connectors and its probably
not just for Dodge. I know you're getting desparate ;-) so you might
even want to try some of the local Chevy, Ford, even import dealers.
Who
knows, if you bring the connector in and get a helpful and/or bored
parts person, you might get lucky! If you are near a large city perhaps
there are some electronics type outlets which may be able to help.
---Jon-
.---- Jon Steiger ------ jon@dakota-truck.net or jon@jonsteiger.com -----. | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL | | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly | `----------------------------------------- http://www.jonsteiger.com ----'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:13 EDT