RE: RE: MAP Connector Part Numbers

From: Wisotzkey, Rich (Rich.Wisotzkey@gd-ns.com)
Date: Tue Aug 13 2002 - 10:46:57 EDT

Next message: Bob Tom: "RE: Congratulations to Ray Block at the Nats!"
Previous message: Ray: "RE: Congratulations to Ray Block at the Nats!"
Maybe in reply to: Bernd D. Ratsch: "RE: MAP Connector Part Numbers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Thanks Bernd,
I checked their website, but haven't located the connector (yet). I
appreciate the lead though.
Thanks,
Rich

-----Original Message-----
From: jon@dakota-truck.net [mailto:jon@dakota-truck.net]
Sent: Monday, August 12, 2002 12:42 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: MAP Connector Part Numbers

"Bernd D. Ratsch" <bernd@texas.net> wrote:

: Rich,

: '96 is OBD-II and the older style use a slightly different connector.
: '96-'02 are the same though.

The connector change doesn't have anything to do with OBD-II, the
changes occured in '97 with the addition of the CCD bus. As such,
'92-96 are the same, and '97+ are the same. As far as the throttle
body goes, to the best of my knowledge, only the MAP and TPS connectors
changed, the IAC connector has remained the same since '92.

Rich, I don't know if this will help or not, but the following numbers
were on my MAP connectors ('96 Dak, '92 Ram):

  On back of connector on grey piece above wires: 54800 (both '92 and '96)
  On back of connector on grey piece below wires: 227 ('92)
                                                  253 ('96)
  On ridge of connector: 76614 A004 ('92)
                         76614 A002 ('96)

I did a 'net search and looked around at amp.com but wasn't able
to come up with anything. Pretty frustrating really, *somebody*
is (or was) making a whole mess of these connectors and its probably
not just for Dodge. I know you're getting desparate ;-) so you might
even want to try some of the local Chevy, Ford, even import dealers. Who
knows, if you bring the connector in and get a helpful and/or bored
parts person, you might get lucky! If you are near a large city perhaps
there are some electronics type outlets which may be able to help.

-Jon-

.---- Jon Steiger ------ jon@dakota-truck.net or jon@jonsteiger.com -----. | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL | | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly | `----------------------------------------- http://www.jonsteiger.com ----'

Next message: Bob Tom: "RE: Congratulations to Ray Block at the Nats!"
Previous message: Ray: "RE: Congratulations to Ray Block at the Nats!"
Maybe in reply to: Bernd D. Ratsch: "RE: MAP Connector Part Numbers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:13 EDT