Gary-
The JBA's are a straight forward install, unbolt the stock
manifolds, reinstall the headers......my website has a few pix of how to do
it...........just use red rtv on the head pipe to header
connection............you'll have two studs to remove on both
sides........just tack weld a nut to the stud
and wind the little buggers out..........it's easy...........another
tip..........have shop do it on a lift and go in thru the
fenderwell.............pull both front wheels for easier working on
it..........it'll take 2 to 2-1/2 hours to do!!
Ron- '01 Dakota Sport 3.9 Supercharged
website: www.scsilverdak.com
e-mail: scsilverdak@hotmail.com
----- Original Message -----
From: "Gary Hedlin" <ghedlin@theramp.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Monday, August 19, 2002 2:45 AM
Subject: DML: Header Install
>
> I'm gonna grab a set of JBA headers in a few weeks, and I was wondering
> besides the headers, what other parts do i need (y pipes?) or does
> everything bolt into the stock exhaust system? I already got some other
> mods in the works, so I might as well do the headers while i'm in there!
>
> Gary Hedlin
> "The Crazy Quadraplegic"
> ghedlin@theramp.net (business)
> ragingquad@yahoo.com (personal)
> **Also Webmaster For**
> http://garyhedlin.com
> http://socaldakota.com
> http://scsilverdak.com
> http://assistivetechnologies.com
> ...And Many More!
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:15 EDT