If the programming on the keyless is the same for Dodge/Chrysler as it is
for Fords, all you have to do is click the ignition to start three times
then hit the lock and unlock buttons rapidly on the remote...then the doors
begin locking and unlocking with the remote.
----- Original Message -----
From: "Wes Weems" <wweems@fix.net>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, August 27, 2002 11:11 PM
Subject: Re: DML: Keyless entry remote blow-out !!!
>
> Anyone know where I can get remotes for cheap, and possibly information on
> programming them? My gf has a 94 mitsubishi diamante, and she wants a new
> remote, because she lost the old... I'll be damned if I spend 70$ for a
> remote and 70 to get it programmed
>
>
> WEs
> ----- Original Message -----
> From: <B1LLYW@aol.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Tuesday, August 27, 2002 7:53 PM
> Subject: Re: DML: Keyless entry remote blow-out !!!
>
>
> >
> > In a message dated 8/27/02 10:49:49 PM Eastern Daylight Time,
> > Nospiratus@aol.com writes:
> >
> > << Chrysler P/N 56045497AA
> >
> > Keyless entry remotes BRAND NEW sold in pairs for $50.00
> >
> > Let me know if you want them. I have alot !!!
> > >>
> >
> > No offence, but I can get them for $25 each from the dealer.
> >
> > Bill White - http://www.moparforme.com
> >
> > '80 Ram D150, 4x2, 400, 727, 3.55 9.25 Sure Grip
> > '02 Dakota QC 4x4, SLT +, 4.7, 5 spd, 3.92's, a few toys
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:16 EDT