RE: Lost Torque??

From: Stlaurent Mr Steven (STLAURENTS@MCTSSA.USMC.MIL)
Date: Fri Aug 30 2002 - 18:27:14 EDT


Interesting to note...

--------------------------------------
Steven St.Laurent
C4i System Engineer
C4i Engineering Branch, PSD, MCTSSA
MARCORSYSCOM, U.S. Marine Corps
Office (760) 725-2506 (DSN Prefix: 365)
"Never be content with somebody else definition
of you. Instead, define yourself by your own beliefs,
your own truths, your own understanding of who
you are. Never be content until you are happy with
 the unique person GOD has created you to be."

-----Original Message-----
From: Ken Allgood [mailto:kenallgood@cox.net]
Sent: Friday, August 30, 2002 2:44 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Lost Torque??

Just curious... Recently I installed a F&B 50mm TB and replaced the stock
PCM with a Mopar PCM (CA Emissions, Federal.. which I'm not in CA, so I
don't have to have the CA PCM)... And although the HP output on mid-high
RPM is awesome, seems to me that I lost some/lot of low-end Torque.. for
example, I could baby it to about 5-10mph, then go WOT, and would spin the
tires (dry) for probably 15 feet before they'd stick.. after the recent TB
and PCM installtion (did 'em about 1 week apart), it's hard to spin the
tires at all, unless I go WOT from standstill or road is wet.. Once I hit
2-2.5k rpm, takes off like a rocket, but it's a little slow before that...
I thought it may have been due to the hot weather, but it's been in the
mid-upper 70's here this week, and still isn't taking off the line very
fast.. not really even at WOT.. Starting to wonder if it's the Mopar PCM
(which I'm piggy-backing Hypertech PCM on).. when I took the Hypertech off,
I noticed lost HP, so I put it back on (even after resetting the computer)..
Also noticed it doesn't ping/sparkknock anywhere near it use to while
towing.. really starting to make me wonder about the mopar CA PCM..
Thoughts???? Maybe time to invest money in some headers??? =D

Ken Allgood
97 CC SLT 5.2L
Quick-D Intake, Gibson Cat-Back, Accel Ignition, JBA 9mm wires, Autolite
3923s, 180 t-stat, Mopar PCM, Hypertech PCM, F&B 50mm TB
Sound: Kenwood Deck, Kenwood Crossover, Rockford Fosgate 800wx2 Amp, 2
Kenwood 12's, 2 JL 12's
Best ETA: 15.8 @ 85mph (Before Accel Ignition, Mopar PCM, JBA wries, F&B
TB - Racing/Street weight: 4380lbs)



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:17 EDT