I think it's supposed to be a 1790, but ask Bernd. He sells them. Yes,
nothing wrong with changing to a 180 t-stat.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Edward
Falsename
Sent: Saturday, August 31, 2002 9:58 PM
To: dakota-truck@dakota-truck.net
Subject: DML: flowkooler water pump install
My 99 RC 3.9L V6 auto is leaking fluid out of the weep hole at the water
pump...with only 20000 miles!!!
Im going to splurge on this luxury (flowkooler part 1760) item and do the
install myself. My question is: 1. Needed to verify the part number above 2.
will i need to make any modifications during this installation or is this
just a simple "remove-the-old-bolt-on-the-new" install? and 3. Should i go
ahead and change the thermostat to a 180 while im taking the thing apart?
thanks
msnbcnnbcbs
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:19 EDT