Re: Trailer

From: jon@dakota-truck.net
Date: Mon Sep 16 2002 - 13:20:20 EDT


"BARRY OLIVER" <DHSPA58@dhs.state.il.us> wrote:

: OK, this wasn't clear...sorry. I want to buy/put togeather a motorcycle trailer that uses the same tires/wheels as my gen3 dak. Anybody have a rear axle, etc. or info on who might make 6 on 4.5 trailer hubs?

  If all else fails, it probably wouldn't be a big deal to redrill the
hubs to the 6 on 4.5 pattern. If you have local places that build
trailers they may be able to do it for you or if not it should be a
fairly simple deal for a machine shop.

  Another alternative of course if you are building it yourself is
to pull a Dak rearend out of the junkyard, though that is probably going
to be more expensive, and certainly heavier.

 You could also try welding Dak hubs to the trailer axle.

-- 

-Jon-

.---- Jon Steiger ------ jon@dakota-truck.net or jon@jonsteiger.com -----. | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL | | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly | `----------------------------------------- http://www.jonsteiger.com ----'



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:21 EDT