>>> jon@dakota-truck.net 09/16/02 12:20PM >>>
If all else fails, it probably wouldn't be a big deal to redrill the
hubs to the 6 on 4.5 pattern. If you have local places that build
trailers they may be able to do it for you or if not it should be a
fairly simple deal for a machine shop.
Another alternative of course if you are building it yourself is
to pull a Dak rearend out of the junkyard, though that is probably going
to be more expensive, and certainly heavier.
You could also try welding Dak hubs to the trailer axle.
**************************************
So, are you telling me this probably isn't a project for Daktoberfest? ;-)
---Jon-
.---- Jon Steiger ------ jon@dakota-truck.net or jon@jonsteiger.com -----. | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL | | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly | `----------------------------------------- http://www.jonsteiger.com ----'
-Barry MCP, A+, Network+, Server+
Efficiency is doing things right. Effectiveness is doing the right things. Character is doing the right thing when nobody is looking.
Contact Info: ================= 217-899-6105 Cell 217-467-8673 Page =================
Alternate Email: ================= barry.oliver@novanis.com Username: barrysuperhawk on AIM, Yahoo, MSN and AT&T Instant Messenging clients =================
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:21 EDT