They would have wired it on the assembly line. If you wanted that item on a
truck on the lot the dealer would have told you No. It has to have been
built when the truck was built.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of BARRY OLIVER
Sent: Tuesday, September 17, 2002 8:48 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Sold..Bought..(the question!!)
So, if I were to have wanted this option when I bought the truck, they would
have had to re-wire my truck??? That dosen't sound right (even though it
may be true..)
>>> Tubamirbls@aol.com 09/17/02 10:14AM >>>
Hi Barry/Adam
I checked into this question of adding the full overhead about a year
ago and the answer was not pleasant so far as cost is concerned. Your best
bet by far would be to remove one from a wreck in a junk yard.
There is no accessory package from MoPar for this item so every part
must be ordered separately. This list becomes rather long and the price
high.
There is no wiring to the cab ceiling to supply the unit, only the
partial overhead wiring is there if that's what your truck came with so you
have one harness to buy for the ceiling and another for the sensors.
It's also quite a task to accomplish getting the cable up to the cab
ceiling, adding the supports for the unit, etc. Getting one off a wreck
also
gives you first-hand familiarity with how to reinstall.
Paul Sahlin
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:21 EDT