"Rick Barnes" <barnesrv@attbi.com> wrote:
: I added Hella 500 lights to my brush guard and installed a switch on my
: cup holder/console that I had screwed down to the floor. I just hated
: drilling holes in my dash.
: Rascalo
I recently installed air horns on my father's 2002 Town and Country -
I put in a cutoff switch such that the air horns can be activated and
deactivated (the stock horns still sound no matter what). Anyway,
I didn't want to drill the dash, and *he* sure didn't want me to drill
the dash, so I found a convenient screw/bolt and made a bracket to
attach to it, then drilled the hole in the bracket for the switch.
I just backed out the stock screw, put the bracket in place, and
put the screw back in - completely reverseable and I powdercoated it
black to give it a finished appearance.
Anyway, if you can find a screw or bolt in a convenient location
on the dash, you may be able to do something similar.
---Jon-
.---- Jon Steiger ------ jon@dakota-truck.net or jon@jonsteiger.com -----. | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL | | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly | `----------------------------------------- http://www.jonsteiger.com ----'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:25 EDT