If you're having problems getting it into FT 4WD, that's a problem... It's smooth like butter on my '98. They may want it rolling for better synchronization but I'm not sure about that. The only time you should be stopped and the transmission in neutral is when shifting into 4-Low.
Sometimes it helps to back-up it it's not engaging or disengaging properly.
Lastly, I think the power is still split in PT 4WD --something like 40:60 front:rear to the axles but not positive...
L8R,
Tom
-----Original Message-----
From: dakota-truck@dakota-truck.net
[mailto:dakota-truck@dakota-truck.net]
Sent: Monday, November 04, 2002 8:43 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Transfer Case Question
>Ron Sobers wrote:
> Howdy.
>...It's a 98 Dak, 5.2 4X4. the trans case has several different options...
> 2WD "All road surfaces"
> Part-Time 4WD "loose slippery road surfaces"
> Full-Time 4WD "All road Surfaces"
> Neutral "For towing"
> 4WD Low range...
>> andylevy@yahoo.com 11/02/02 01:04PM >>>
..FT4WD engages the front driveshaft and puts the case into a "differential" mode - between the front & rear driveshafts is a
viscous coupling ... This gets power to all 4 corners but
prevents binding under most driving conditions; ... PT4WD locks this differential, forcing both front & rear to be spun equally & get the same power. ..
=========
Heyyyyyy! I feel cheated! I have a '99 5.2 4x4 SLT and all I have is 2WD, PT4WD, Neutral and FT4WD [Which I have never succesfully engaged, the manual says to be moving(?!?) when you shift - WTF!?! When I have needed it, I was already stuck - ie immobile] Did this get changed between '98 and '99 or am I an idiot that knows nothing about my truck. Before you flame me, remember, at least this IS dak-related, albeit stupid... TIA
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:24 EST