I can't speak with a whole lot of certainty, only b/c I have yet to buy the
stuff and install it. from what I understand the 1.6 rockers=10-15hp's and
the cam as spec'ed out on the previous post=10-15hp's. my understanding is
that it rev's faster. I'm not to sure what to think of Greg's Conner's post
(nothing against you!). I have heard such great things with this setup. not
sure if you are just wanting more or what.
what other mods do you have? I know you are looking at exhaust...I made the
clips now I need to edit them (get rid of the video part) to make them a bit
smaller...hopefully I'll have it for you tomorrow :-)
Tim Althoff
www.yllwdkta.com
-----Original Message-----
From: Josh Battles
To: dakota-truck-moderator@bent.twistedbits.net
Sent: 11/7/02 9:37 AM
Subject: DML: Re: Re: RE: Re: winter projects...
with those rockers and cam that kind of performance increases should be
expected? How will my mileage be effected (i drive a bunch)? Am I gonna
have
to run straight up premium fuel in the truck (i should already be doing
that
with the pcm i have.....) and finally, will that cam give my 6 a slight
lope/make it sound like it's goe a cam in it??
Josh
2000 CC V6
"Life would be so much better with a soundtrack..."
""Gary Hedlin"" <ghedlin@theramp.net> wrote in message
news:aqcku5$57q$1@bent.twistedbits.net...
>
> The comp cams 1.6 ratio cams (part no 1424-KIT) will work perfect.
They
> also are significantly cheaper than the crowers. The 1.7's really
don't
> give you that much HP compared to the 1.6's. If your doing the rocker
arms,
> I'ld recomend a camshaft too. a Comp Cams 504/.512 Lift, 200/206
Duration
> (part no 3310) should work nicely, thats what I'm using for my new V6.
>
> Gary Hedlin
> "The Crazy Quadraplegic"
> ghedlin@theramp.net (business)
> ragingquad@yahoo.com (personal)
> Webmaster For
> http://garyhedlin.com
> http://importslayer.com
> http://socaldakota.com
> http://scsilverdak.com
> http://assistivetechnologies.com
> ...And Many More!
>
> ""Tim Althoff"" <talthoff@yllwdkta.com> wrote in message
> news:000601c28607$0bbca280$6400a8c0@computer...
> >
> > hey, I was going to email you just b/c I knew you know a lot about
the
> 6ers!
> > what roller rockers would you suggest, 1.6-1.7? what are the
benefits
and
> > drawbacks of each. I plan on keeping my truck N/A with no
nitrous...
> >
> > Tim Althoff
> > 99 SY 3.9 5-Speed 'Customized' RC Dakota
> > http://www.yllwdkta.com
> >
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
ScSilverdak
> > Sent: Wednesday, November 06, 2002 9:01 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: DML: Re: winter projects...
> >
> >
> >
> > Tim...........
> >
> > call Marty at KRC performance, he has a couple cams, and the roller
> > rockers,.....or contact me in a month.....and I'll see if I can help
on
> the
> > stuff you need....a new venture is currently in progress in the perf
parts
> > business,......more later on!
> >
> > Ron-
> > '01 Dakota Sport 3.9 Supercharged
> > website:http://www.scsilverdak.com
> > e-mail: scsilverdak@hotmail.com
> >
> > ----- Original Message -----
> > From: "Tim Althoff" <talthoff@yllwdkta.com>
> > To: "'dml'" <dakota-truck@dakota-truck.net>
> > Sent: Wednesday, November 06, 2002 8:48 PM
> > Subject: DML: winter projects...
> >
> >
> > >
> > > no one replied to help me!
> > >
> > > Tim Althoff
> > > 99 SY 3.9 5-Speed 'Customized' RC Dakota
> > > http://www.yllwdkta.com
> > >
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@bent.twistedbits.net
> > > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Tim
Althoff
> > > Sent: Monday, November 04, 2002 10:52 AM
> > > To: 'dakota-truck@dakota-truck.net'
> > > Subject: DML: winter projects...
> > >
> > >
> > >
> > > ok guys, I need some help picking out the perfect parts for my
winter
> > > project. I plan on adding roller rockers, cam, and if money, and
the
> > better
> > > half says it's ok, like to port/polish my heads, and i guess add
headers
> > > while i'm there. also i will be adding the billet belly pan to
help
> seal
> > > things up a little.
> > >
> > > CAM
> > > what cam do i get. i would like very nice gains but also like a
little
> > > lope, I want people to be able to tell i have a cam in it!
> > >
> > > ROLLER ROCKERS
> > > what roller rockers do i get. 1.6 or 1.7? What brand is the
best.
> > >
> > > please make sure you include everything i need to create a great
setup.
> > > Thanks guys!
> > >
> > > hey Ray Block, did you ever talk to that guy about machining
heads?
> > >
> > > Tim Althoff
> > > www.yllwdkta.com
> > >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:25 EST