The throttle body will bolt right up without any issues. However, you
need to swap out the cable for a V8 version (Same year/model preferred)
to attach up to the V8 linkage. Other than that, just clean your IAC
solenoid and install all the sensors from the V6 TB onto the V8 TB (they
work just fine).
If you plan on doing an engine swap...injector harness, PCM, driveline
(required with V6 manual trans) and some patience with the swap.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Thomas
Mize 3rd
Sent: Thursday, December 19, 2002 7:37 PM
To: dakota-truck@dakota-truck.net
Subject: DML: V6 to V8 throttle body upgrade pros and cons needed.
Ok i just aquired a Magnum 5.2 out of a 98 Durango it is mostly
complete..(block,heads,oil pan,exhaust manifolds) now my question is...
what
can be used from the v8 on my v6?
throttle body... what are the pros and cons? will it just bolt up or
not? if
so what do i need to change? are there any advantages to doing that? any
help will be very appreciated. thanks
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:48:15 EST