RE: Magnum Engines Oil Filtration System

From: Bill Pitz (dakota@billpitz.com)
Date: Thu Jan 30 2003 - 11:25:22 EST


At 07:31 AM 1/30/2003 -0600, you wrote:

>Most of the 3.9/5.2/5.9L engines idle at about 15-20psi (oil pressure)
>and run at 60-70psi at 3000+rpm. The bypass valve is there in case the
>filter gets plugged...then it will open and bypass (no filtration).
>
>On using the Mopar filters (as Gary mentioned)...the Anti-Drainback
>Valve is much better. Mopar uses a heavier duty valve (anti-drainback)
>to prevent the annoying lifter-clack in the mornings (applies to
>3.0/3.3/3.9L and can apply to the 5.2/5.9L as well). FYI: Mopar filters
>are built by WIX.

Are they? According to this site: http://www.minimopar.net/oilfilters.html
it's sort of a hit and miss with Mopar filters. Sometimes you get a Wix,
sometimes a Fram, sometimes a Champion, etc.... Seems like it'd be easier
to just buy the Wix so you know you're not getting any Fram garbage.

-Bill



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:46 EST