bob wrote:
>
> Hey Guys,
>
> I could use some help. I presssure washed my motor last night while my
> truck was running....I've done it probally 50 times...
> when done last night I had a slight miss, well now she won't start
> cranks fine, fuel in the fuel rail, took the jet chip off just in case,
> pulled
> the pcm plugs and they are dry. I've got a strong spark from the
> coil...at the cap, but a weak spark at the plugs.
> I pulled the cap and found some mosture...not a lot, but I guess it
> wouldn't take much, I wiped out the cap aand lifted up the plastic plate
> where the pick up? is and it was a liitle moist too....I'm gona dry
> everything out with a hair dryer and see if it starts.
WD-40 on the cap, rotor & plug wire ends. We've used a *lot* of it on
the Jeeps at Jon's. The WD stands for "water-displacement"
-- -andyhttp://home.twcny.rr.com/andylevy/ --- andylevy@yahoo.com -------------------------------------------- modesty, n.: Being comfortable that others will discover your greatness --------------------------------------------
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:51 EST