Re: RE: RE: Please Help No Spark At Plugs

From: Vinny (cbruce@oz-online.net)
Date: Fri Feb 21 2003 - 18:43:21 EST


Iv replaced coil today still nothing, I think its time that its going to go
to a mechanic.

Vinny
""Rick Barnes"" <barnesrv@attbi.com> wrote in message
news:001601c2d9ae$9d695ca0$0200a8c0@sys15...
>
> I agree with Rich, I have seen some coils act very strangely, (test good,
> but no spark), or fail after they heat up, so make sure about your coil.
>
> Rascal
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Wisotzkey,
> Rich
> Sent: Friday, February 21, 2003 8:20 AM
> To: 'dakota-truck@dakota-truck.net'
> Subject: DML: RE: Please Help No Spark At Plugs
>
>
> Vinny,
> First I would make sure anything you unplugged was plugged back together.
> Look for anything you may have accidentally disconnected. Since you say
> there is no spark after the coil, I'll assume you have voltage reaching
the
> coil. Have you checked to see the coil wires are seated? Last think I
can
> think of would would be testing the wires and coil, and still possibly
> swapping out your coil after the test. I've seen coils test good, but are
> still bad. That's all I can think of off hand from your problem
> description.
> Good-luck,
> Rich - Ashburn, VA
>
> -----Original Message-----
> From: Chris Rohr [mailto:BlackThunder@dragonlance.zzn.com]
> Sent: Thursday, February 20, 2003 8:51 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Please Help No Spark At Plugs
>
>
>
> I see there were couple of other posts and was wondering if David or
Brannie
> Sung found out the source of the problem. My truck has no spark after the
> coil. I have already replaced the crank and cam sensor, checked the auto
> shut down relay and fuses.
>
> I can not find anything wrong!
> I was working on my exhaust (broke an o2 sensor when working on it) when
> afterwards the truck will no start anymore. It might be just a coincidence
> though. And there is no check engine light on and the on/off code checking
> came up okay.
>
> Please help.
> Thanks
> Vinny
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:51 EST