dang it..ignore my earlier post..was thinking about my 96, but I have the 93
style return line system on it, with the easy connectors..heh.
If it is the same kind of connectors as the ac lines, you can make a shim
pretty easy, made one out of an old tent pole when I did my heatercore
Greg Conner
1996 RC
3.9 hybrid
>From: "Tim Berry" <coolva1@cox.net>
>Reply-To: dakota-truck@dakota-truck.net
>To: <dakota-truck@dakota-truck.net>
>Subject: DML: Re: RE: Fuel line connector
>Date: Mon, 24 Feb 2003 10:57:12 -0500
>
>
>if its the one that i'm thinking of, the same as the AC lines, Advance
>Autoparts has them for ~$2.00 for each size... (had to get them to do my
>heater core) i think they are called Spring Press fittings or something
>close?
>
>Tim Berry - Chesapeake, VA
>97 Dakota CC 360 Auto 4300lbs
>best ET to date: 13.03@103.76
>355.8RWHP 395.2RWTQ
>99 Neon R/T Daily Driver
> >
> > Yes...you can find the tool at your local auto parts store for about
> > $10.00.
> >
> > (It's a 3/8" line)
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bill
> > Urbanovsky
> > Sent: Monday, February 24, 2003 8:38 AM
> > To: dakota-truck@dakota-truck.net
> > Subject: DML: Fuel line connector
> >
> >
> >
> >
> > Hello,
> >
> > 1996 Dakota 3.9 v6. (throttle body)
> >
> > I am attempting to remove the fuel line where it attaches to the
> > injector manifold. I removed the outer clip but there appears to be an
> > internal clip of some sort holding the connection together. From
> > looking at a manifold that has the line removed it appears that this
> > internal clip is made of plastic. Does this reqire a special tool?
> >
> > Thanks.
> >
> > Bill
> >
> >
> >
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:52 EST