I went out and took measurements and came up with 6 1/8" of backspacing.
I did it three times using a pant stick across the rear of the wheel. I
measured from the area that would touch the rotor to the very edge of
the wheel. HTH
Jeff Durling
>
> Hello all,
> I have a quick question. I know that a R/T has a 17
> inch wheel, But is it a 17x7 or 17x8 and does anyone
> know the offset. I think it is 3.5 but am not sure.
>
> Thanks
> Matt Tharp
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:58 EST