Ok, that helped somewhat... now, when I get Cyl 1 to what I believe is TDC,
I cannot tighten the rockers so it's tight enough (cannot get it to zero
Lash)....... So I guess that means that I'm really not at TDC...
grrrr.....
Ken
----- Original Message -----
From: "andy levy" <andylevy@yahoo.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Sunday, March 09, 2003 1:09 AM
Subject: Re: DML: truck won't @%U&@%@ start after installing rockers
>
> Ken Allgood wrote:
> > Ok, which is cyl 1, 8, etc?
>
> The odd cylinders are on the left (driver's side), the even cylinders
> are on the right (passenger's side). Numbered front to back. If you
> look at the truck from above, it's like this:
>
> Bumper
> 1 2
> 3 4
> 5 6
> 7 8
> firewall
>
>
>
> --
> -andy
>
> http://home.twcny.rr.com/andylevy/ --- andylevy@yahoo.com
> --------------------------------------------
> "Whatever Adam does, do the opposite and you'll be fine"
> -Bob Tom
> --------------------------------------------
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:59 EST