The Mopar PCM can handle 24# injectors...sometimes 30#...but not 36#.
- Bernd
>
> Initially, I'll be using a Mopar PCM to control the 36lb injectors. Yes,
> 30lb injectors would probably be large enough, but I'm going to be
> experimenting with 36lb injectors.
>
> -----Original Message-----
> From: Bernd D. Ratsch [mailto:bernd@texas.net]
> Sent: Wednesday, March 12, 2003 8:29 AM
> To: dakota-truck@dakota-truck.net
> Subject: RE: DML: #24 FMS Injectors
>
>
>
> What are you going to use to control the 30# injectors?
>
> - Bernd
>
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Wisotzkey,
> Rich
> Sent: Wednesday, March 12, 2003 5:44 AM
> To: 'dakota-truck@dakota-truck.net'
> Subject: RE: DML: #24 FMS Injectors
>
>
>
> John,
> It's a 318, but it breathes very well!
> Rich
>
> -----Original Message-----
> From: Pukeloser@aol.com [mailto:Pukeloser@aol.com]
> Sent: Tuesday, March 11, 2003 2:57 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: #24 FMS Injectors
>
>
>
> Damn!
>
> Starving for fuel with 24# injectors? what size motor do you have?
>
> John S
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:59 EST