So whatever it says at idle should show me the timing that's programmed
into the computer. Should I wait for the truck to be in CL or OL?
Thanks
william
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
Ratsch
Sent: Monday, March 17, 2003 8:09 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Using DRBIII to look at base timing?
"Base" timing at idle will fluctuate slightly....most scanners will show
it though.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of William H.
Hiatt III
Sent: Monday, March 17, 2003 9:04 PM
To: dml@dakota-truck.net
Subject: DML: Using DRBIII to look at base timing?
I'm diagnosing the truck and wanted to know if it is possible to get to
the base timing that is set in the PCM via the DRBIII. I just want to
see what it is set at.
Thanks
william
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:00 EST