My Dak set's a couple inches higher than yours, Bernd!
AND I'm only 5'6" TALL.........HEHEHEHE
and this was the first time I did this type of job!
SOME of US are little slower than others!!!
(and they know who they are......)
Ron-
Co-owner: Muscletrucks.net
website: www.muscletrucks.net
e-mail: scsilverdak@hotmail.com
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@dakota-truck.net>
Sent: Saturday, April 19, 2003 11:08 AM
Subject: DML: RE: Re: Re: RE: New Injector Install
>
> Hehehehehe...1/2 hour tops for me. ;)
>
> If you lift the TB, replace the gasket (might as well take it off).
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> scsilverdak
> Sent: Saturday, April 19, 2003 7:44 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Re: Re: RE: New Injector Install
>
>
>
> 2 DAY JOB??......... FOR A SET OF 6 INJECTORS!!hehehehe.........
>
> Gary.....just unbolt the fuel rails and unbolt the bracket for the TV
> cable and Throttle cable and and disconnect both cables and set them
> aside, this should give you enough room to work..........or just loosen
> and lift up the TB after disconnecting the cables and plugs.
>
> I did mine in about 45 minutes without unbolting the TB from the
> intake........hope this helps.....
>
> Ron-
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:12 EST