Re: Sub no worky :-(

From: Eric Jerman (ejerman69@hotmail.com)
Date: Sat Apr 19 2003 - 20:26:04 EDT


check the rca connection on the amp itself. It could be that your amp has
RCA inputs and RCA outputs so that you can jump another amp with a short
patch cord. The RCA's should be plugged into the "input" of the amplifier,
could be something that simple...or if the preouts on your radio are black
and gray then they could be reversed. Also check the crossover on the
amp...if it's set on High Pass then you won't get much if anything from the
subwoofer itself.
HTH some,
Eric Jerman

>From: Blakdak2k@aol.com
>Reply-To: dakota-truck@dakota-truck.net
>To: dakota-truck@dakota-truck.net
>Subject: DML: Sub no worky :-(
>Date: Fri, 18 Apr 2003 17:31:13 EDT
>
>
>I got everything hooked up today but the sub is not working, There is a
>small
>light on top of the amp that comes on when the stereo is on so I know the
>power, ground and remote wires are working, and the speaker wire to the sub
>is wire up properly, and the audio cables from the cd-player are hooked up
>right (red to red and white to white). Any suggestions on what it might
>be.
>There is a input sensitivity dial on the amp marked min, 1.0, 0.5, 0.3,
>max,
>it doesn't seem to do anything, but I don't know where it should be at.
>Also
>coming off the back of the cd-player are two hook ups for audio cables L
>and
>R I am assuming but not marked, they are just grey and black?
> Thanks for the help
>Aaron

_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
http://join.msn.com/?page=features/virus



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:12 EST