-----Original Message-----
From: jon@dakota-truck.net [mailto:jon@dakota-truck.net]
Sent: Thursday, April 24, 2003 4:48 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Black Magic 150 fan--wiring question
"Shane Craven" <shanec@spie.org> wrote:
: : Where do you wire the Black Magic 150 fan to make it turn off with the key?
: : (Under dash fuse box with a 10 amp fuse or splice into the cigarette lighter or ??)
:>
:> What you can do is to cut your current power feed line to the fan,
:>and install a relay in-line. As the switching source for the relay,
:>tap into any wire or location which is hot when the ignition is on.
: Thanks, Jon! Do I have to go through the firewall to find a wire that's only hot when :ignition is on (like the ciggypoop lighter), or is there a location in the under-hood fuse :box?
> You can probably find a wire under the hood (might have to probe
>around a bit with a multimeter or test light; a FSM would be helpful
>also), but if all else fails, you should be able to bring it through
>the firewall without too much trouble.
Thanks to Jon and Andy for the info. How many amps/watts should I be looking for on my multimeter? Or does it even matter? Am I just looking for any wire than is hot only when ignition is on?
ShaneC
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:13 EST