Sounds like you wet down a sensor somewhere. You can WD-40 the crap out of
it if need be.
It might dry itself up overnight though.
TonyC
-----Original Message-----
From: Gary Hedlin <ghedlin@theramp.net>
To: dakota-truck-moderator@bent.twistedbits.net
<dakota-truck-moderator@bent.twistedbits.net>
Date: Monday, April 28, 2003 12:00 AM
Subject: DML: Help needed
>
>This afternoon I decided to clean my engine compartment, so I got the
>degreaser and the hose out and gave her a good clening. I've done this
>several times in the past with no problems. And yes, the engine was cold
as
>ice. I let everything dry for a few hours, then tried to start it to pull
>it in for the night. At first it wouldn't start, but I tried agian a few
>minutes later, and it fired up, but poorlly idled. I drove it arround the
>corner to pull it in, and the engine was sputtering alot and would not
>respond to me giving it gas. Also, the check engine light is blinking.
>
>Did I just screw my engine over, or just get some water in the engine? Is
>there anything I can do in the morning if this continues?
>
>--
>Gary Hedlin
>President
>Hedlin Web Designs
>http://www.hedlin.net
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:13 EST