RE: AMSOIL...Is it just me or...

From: RayB (bpracing@worldnet.att.net)
Date: Thu May 01 2003 - 14:25:04 EDT


Just occurred to me that perhaps I should clarify my thoughts on oil
viscosity. If you have a high mileage truck whose oil pressure is reading
significantly lower than it did new, it would be prudent to try a heavier
viscosity oil and see it that restores the oil pressure. It would be
cheaper than replacing the pump and/or bearings. :-)

RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html

> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of RayB
> Sent: Thursday, May 01, 2003 1:50 PM
> To: dakota-truck@dakota-truck.net
> Subject: RE: DML: AMSOIL...Is it just me or...
>
>
>
> Your choice, Barry. Just sharing my experience vs. "most everybody that
> uses it thinks it's the perfect oil". Still, hard to escape
> the fact that
> heavier weight oils are harder to pump and to squeeze into close tolerance
> areas designed for thinner oil. Last time I used a viscosity above 10w30
> was in the '70's, in my '69 Charger R/T 440. And that was 20w40
> racing oil.
> :-)
>
> RayB
> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of BARRY
> > OLIVER
> >
> > 15w50 Mobil 1 too thick for godawful hot midwest summer?
> > Everything else I have heard about 15w50 Mobil 1 is that most
> > everybody that uses it thinks it's the perfect oil. I do a lot
> > of highway miles [35k/yr] and was under the impression that this
> > was a prudent choice.
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:17 EST