Thanks Ed. That's the same way I pull codes from the '94 Voyager. For some
reason I was under the impression that wouldn't work on this truck. I'll
head out and try that in the morning.
Tim
>
> Date: Mon, 5 May 2003 22:44:04 EDT
> From: Olznut@aol.com
> Subject: Re: DML: Issue With 2000 CC 4.7 4X4
>
> In a message dated 5/5/2003 7:27:27 PM Pacific Daylight Time,
tkoth@cox.net
> writes:
>
> >
> > A few years ago when I first joined the DML it was posted that you could
> > pull codes from the Gen-3's by holding down the trip odometer reset
button
> > while turning on the ignition. This does send my truck through a self
test
> >
> > sequence but has never flashed any codes for me. Is there another way to
> > get
> > codes from this thing without a scanner?
> >
> >
>
> On my '01, I get the codes by turning the key on and off 3 times, then the
> codes start coming up on the odometer, always ending up with a "P done"
>
> Ed "Olznut" Halterman Sunland, Ca '01 Dakota Quad Cab SLT+ 4.7L 4x4
"Silver
> Streak" '66 Olds F-85 330 V-8, Intense Blue "Project Olds" Will Be
Finished
> Sometime This Millenium!!
>
> ------------------------------
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:18 EST