Sorry to drag on the fan questions, but...
If the Viper Fan switches from low to high based on coolant temp, it must use
a dual temp thermo switch (similar to the Saab Switch). Is this correct? If
so, could you find out the on/off values for low and high? OR...
Does it switch from low to high from a signal from the A/C circuit, and the
temperature raising as a byproduct of the extra heat from the condenser?
Now I'm confusing myself!
James
In a message dated 5/6/2003 6:34:19 AM Eastern Standard Time, bernd@texas.net
writes:
> Yes and yes...A/C and temp.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> JAMEPC@aol.com
> Sent: Monday, May 05, 2003 9:47 PM
> To: aol@dakota-truck.net
> Subject: Re: DML: RE: Viper Fan - Factory Specs
>
>
> Is it the actual raise in temperature that switches from low to high (a
> dual
> temperature switch) or a relay connected to the A/C circuit? If the
> A/C
> comes on before the temperature switch turns on the fan, will it run on
> low
> or high?
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:18 EST