High-Speed is used for A/C Ray.
- Bernd
>
> In the stock system, the PCM decides which fan speed is needed. IF temp is
> within certain range, turn on low speed relay. IF temp is above that range,
> turn off low speed relay and turn on high speed relay. IF AC is on, damn...
> better turn on one of them! (I haven't looked up which is used for AC) :-)
>
> RayB
> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:18 EST