Just had the front end aligned and lower ball joints replaced on my 99 R/T
with Mopar headers and the shop had no problems with mine.
----- Original Message -----
From: <Tomdamit@aol.com>
To: <aol@dakota-truck.net>
Sent: Wednesday, May 07, 2003 2:28 PM
Subject: DML: Front end alignment w/ JBA headers
>
>
>
>
>
> I took my '98 Dak in to have the front end aligned to cure a slight pull
to
> the left. The tech from the independant front end shop called me to say
he
> couldn't do the alignment because he couldn't reach the rear bolt on the
> right upper control arm 'cause the right header was in the way. I'm not
sure
> if he didn't know how or didn't have the right tools or if that is true.
He
> said the header had to come off or the engiine had to be jacked up. Is
this
> true? Anyone had similar experience?
>
> Tom Ware
> '98 CC V8
> Roseville, CA
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:18 EST