hehe..ya worked with the guy ...and its even listed in his sig Bernd.....
getting old must be hell on ya... hehe
Tom "Slick" North
---------->"96"<------ Dodge Dakota 5.2L RC
;)
Greg Conner
1996 RC
3.9 hybrid
>From: "Bernd D. Ratsch" <bernd@texas.net>
>Reply-To: dakota-truck@dakota-truck.net
>To: <dakota-truck@dakota-truck.net>
>Subject: DML: RE: RE: Time for a little rear-end work...
>Date: Wed, 14 May 2003 21:02:58 -0600
>
>
>On Tom's '95, no problems on the swap to an 8.75". On the '98 diff,
>there's the sensor on the diff housing. Shouldn't be a big problem, but
>would be easier to change to the HD Dana unit with HD U-Joints.
>
>- Bernd
>
>-----Original Message-----
>From: owner-dakota-truck@bent.twistedbits.net
>[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Rick
>Barnes
>Sent: Wednesday, May 14, 2003 7:50 PM
>To: dakota-truck@dakota-truck.net
>Subject: DML: RE: Time for a little rear-end work...
>
>
>
>The one on my 98 is giving up too...what would you do Bernd?
>
>Rascal
>
>-----Original Message-----
>From: owner-dakota-truck@bent.twistedbits.net
>[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Tom Slick
>North
>Sent: Wednesday, May 14, 2003 9:32 PM
>To: DML
>Subject: DML: Time for a little rear-end work...
>
>
>Well, I've been putting it off as long as possible, but the rear-end on
>my Dak is apparently going south...
>
>I'm trying to decide whether to just get the bare min. done to it just
>to keep it on the road, or should I go ahead and get the whole rear-end
>rebuilt, or should I get an 8 3/4" rear-end... Money is an issue, but
>I
>may be willing to spend the extra money if justifiable...
>
>Thanks in advance!
>Tom "Slick" North
>96 Dodge Dakota 5.2L RC
>
>
>
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:19 EST