Ok DML, I am off to paradise for about 10 days. I am heading to Waikiki. I
will be off the DML so it should be much more peaceful for at least a little
while. Take good care and I will talk to you soon.
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
Ratsch
Sent: Wednesday, May 14, 2003 11:03 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: Time for a little rear-end work...
On Tom's '95, no problems on the swap to an 8.75". On the '98 diff,
there's the sensor on the diff housing. Shouldn't be a big problem, but
would be easier to change to the HD Dana unit with HD U-Joints.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Rick
Barnes
Sent: Wednesday, May 14, 2003 7:50 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Time for a little rear-end work...
The one on my 98 is giving up too...what would you do Bernd?
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Tom Slick
North
Sent: Wednesday, May 14, 2003 9:32 PM
To: DML
Subject: DML: Time for a little rear-end work...
Well, I've been putting it off as long as possible, but the rear-end on
my Dak is apparently going south...
I'm trying to decide whether to just get the bare min. done to it just
to keep it on the road, or should I go ahead and get the whole rear-end
rebuilt, or should I get an 8 3/4" rear-end... Money is an issue, but
I
may be willing to spend the extra money if justifiable...
Thanks in advance!
Tom "Slick" North
96 Dodge Dakota 5.2L RC
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:19 EST