on mine it says 53006618 (pass) and 53006619 (driver)
pass is date stamped 4/92 the driver is 6/92
-dan
----original below------------------------
Date: Sun, 1 Jun 2003 22:33:27 EDT
From: B1LLYW@aol.com
Subject: Re: DML: Re: 92/93 Exhaust Manifolds
In a message dated 6/1/2003 10:32:02 PM Eastern Standard Time,
kylevan@telus.net writes:
> BOOM: http://faq.dakota-truck.net/Model_Years/1992.html
>
> "1992 and early 1993 factory Magnum cast iron exhaust manifolds are larger
> than later manifolds. The 1992 manifolds are 2 18" inside diameter, and the
> newer models are 1 7/8" inside diameter. The casting numbers for the 1992
> exhaust manifolds are 53006617(driver's side) and 53006618(passenger's
> side). The corresponding Y-Pipe must be used with these manifolds
Thanks much.
Bill White - http://www.bionicdodge.com
'02 Dakota QC 4x4, SLT +, 4.7, 5 spd, 3.92 LSD
'95 Dakota CC 4x2, SLT, 318, 5 spd, 3.55 LSD
------------------------------
=====
Dan K.
'92 Grey Dak CC, 318, 4x2, 46RH, 3.92 rear, 235/75R15, PS, PW, PB, PL, Cruise,
AC, & 110,000mi. mods: cool air induction, K&N filter, Autolite 3924s
future: M-1, Mopar PCM, 180* stat, Trans-Go shift kit, 3" Gibson swept, underdrive pulleys, re-locating IAT sensor, and WC drop kit front and rear
__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:26 EST