> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of WP
>
> I'm building a 360 Magnum, and am putting in a larger cam. I bought new
> valve springs (P5249464), and when I went to install them on my heads, I
> found they're larger diameter than stock. My stock retainers look
> like they'll pull right through these new springs. Are the chrome-moly
> retainers (P4452032) larger diameter than stock, or just stronger?
>
> Thanks> Warren
I can't remember if the MP retainers are larger than stock but they are
stronger. I used the same springs you have and the P4452032 retainers when
I was running the R/T cam. No problems. If you don't already have the
retainers, I have a complete new set, in original packaging, for sale for
$60.00 plus shipping. I bought them for another set of heads with
different valve springs but they didn't give enough installed height. Had
to buy a different brand. Write me off list if you want them.
RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
bpracing@att.net
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:29 EST