That's what I'm thinking. There is some slack in the factory cable.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of RayB
Sent: Friday, June 27, 2003 11:14 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: How do I adjust the throttle cable?
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Dave
> Downing I was looking under the hood today and realized that I have
> about 1/2" of play in the throttle cable. It's routed under the little
> roller, but there's enough slack I can just pull it around and over
> the roller. It was getting dark so I didn't have time to mess with
> it, but I'm assuming there's a way to take the slack out and adjust
> the clip on the bracket, am I right?
>
> --> Dave> '02 FR RC R/T
Could it be that the slack you perceive is just the gas pedal being
pulled to the floor as you pull on the cable? :-)
RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:32 EST