RE: RE: RE: Re: RE: Hemi Headers: Long Tube Race Headers

From: Bernd D. Ratsch (bernd@texas.net)
Date: Sun Jul 13 2003 - 19:00:58 EDT


Jonas can email you his and you can contact Joe at JBA for their Dyno
sheets. Easy as that.

- Bernd

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bob Mankin
Sent: Sunday, July 13, 2003 1:33 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: Re: RE: Hemi Headers: Long Tube Race Headers

Bernd, where are those dyno sheets? Got a URL?

Bob

> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Bernd D.
> Ratsch
> Sent: Sunday, July 13, 2003 11:18 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: Re: RE: Hemi Headers: Long Tube Race Headers
>
>
>
> About 10RWHP and 10RWTQ more. :)
>
> (Got the Dyno sheets from Jonas and JBA - Shorty vs. Long-Tube System)
>
> Long-tube headers normally will provide you with a powerband
> from mid to
> upper RPM range vs. the shorty headers giving you better
> gains at lower
> to mid (with some improvements on top-end as well). In
> comparison...shorty = street/daily driver and long-tube = high
> performance street/race. (With some exceptions to that rule though)
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> Jim Miller
> WB5OXQ
> Sent: Sunday, July 13, 2003 12:24 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Re: RE: Hemi Headers: Long Tube Race Headers
>
>
>
> What is the functional difference between long tube and short tube
> headers?
> ----- Original Message -----
> From: "Bernd D. Ratsch" <bernd@texas.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Saturday, July 12, 2003 7:09 PM
> Subject: DML: RE: Hemi Headers: Long Tube Race Headers
>
>
> >
> > Be prepared for one order there Jonas. Got our lead tech VERY
> > interested in those. ;)
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> > KatzkinLeather@aol.com
> > Sent: Wednesday, July 09, 2003 10:10 AM
> > To: dakota-truck@dakota-truck.net
> > Subject: DML: Hemi Headers: Long Tube Race Headers
> >
> >
> >
> > Hey guys.. I know alot of you have been looking for Hemi
> products as
> > well..
> >
> > Our Hemi Headers are finally ready for order. We have been seeing
> > 35-41 Hp gain.. They are a true race engineered long tube header
> > package that includes EVERYTHING; gaskets, bolts, pittings, heat
> > shields, dual 3" high flow cat's, etc, etc.
> >
> > Here is a link. I already have a set on my Hemi Ram and REALLY cant
> > say enough about them.
> >
> >
> http://elitecustoms.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=E
> > C&
> > Product_Code=ECILTH&Category_Code=EP
> >
> > Anyone know of any good Hemi Ram lists or forums?
> >
> > Jonas
> > info@elitecustoms.com
> >
> >
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:36 EST