good addition Jon.. I figured going with the higher grade bolts was a
given.. but hadn't even thought about suggesting to go stainless.. those
would be real nice if you even had to take them back out again.
Aaron Wyse
1994 RC WS 2.5L 5spd
1986 Shelby Charger Turbo
1984 RamCharger 4X4 360
----- Original Message -----
From: <jon@dakota-truck.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Monday, July 21, 2003 12:52 PM
Subject: Re: DML: Re: Cab Mounts
>
> "Aaron Wyse" <awyse@sw.rr.com> wrote:
>
> : Yes.. Go to Lowes or Home Depot.. and simply pick out the ones you
want.
> : Keep it simple.
> : Those bolts don't need the Mopar part number to fit. standard thread
and
> : lengths I'm sure.
> : Aaron Wyse
>
>
> If you go this route, be sure to get least grade 5 or 8 hardware,
> not the el-cheapo grade 2 stuff. Stainless would probably be OK also.
>
>
> --
>
> -Jon-
>
> .---- Jon Steiger ------ jon@dakota-truck.net or
jon@jonsteiger.com ------.
> | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL
|
> | 70 Cuda, 90 Dak 'vert, 92 Ram 4x4, 96 Dak, 96 Intruder 1400, 96 FireFly
|
> `------------------------------------------
http://www.jonsteiger.com ----'
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:39 EST