Re: Re: Cab Mounts

From: Tony Cellana (acellan1@tampabay.rr.com)
Date: Tue Jul 22 2003 - 01:20:12 EDT


Don't forget the anti-seize!!
TonyC

-----Original Message-----
From: Aaron Wyse <awyse@sw.rr.com>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Monday, July 21, 2003 7:43 PM
Subject: Re: DML: Re: Cab Mounts

>
>good addition Jon.. I figured going with the higher grade bolts was a
>given.. but hadn't even thought about suggesting to go stainless.. those
>would be real nice if you even had to take them back out again.
>Aaron Wyse
>1994 RC WS 2.5L 5spd
>1986 Shelby Charger Turbo
>1984 RamCharger 4X4 360
>
>----- Original Message -----
>From: <jon@dakota-truck.net>
>To: <dakota-truck-moderator@bent.twistedbits.net>
>Sent: Monday, July 21, 2003 12:52 PM
>Subject: Re: DML: Re: Cab Mounts
>
>
>>
>> "Aaron Wyse" <awyse@sw.rr.com> wrote:
>>
>> : Yes.. Go to Lowes or Home Depot.. and simply pick out the ones you
>want.
>> : Keep it simple.
>> : Those bolts don't need the Mopar part number to fit. standard thread
>and
>> : lengths I'm sure.
>> : Aaron Wyse
>>
>>
>> If you go this route, be sure to get least grade 5 or 8 hardware,
>> not the el-cheapo grade 2 stuff. Stainless would probably be OK also.
>>
>>
>> --
>>
>> -Jon-



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:39 EST